Oversize and overweight permit routing
The permit becomes the route.
Drop off the permit PDFs for a load. CDL Pilot reads every segment, rebuilds the route on a map, and checks each road against the permit text. Anything that does not match is flagged for a person to review.
The free plan includes 3 loads a month.
Sample load: TX, OK, KS
- Matches permit
- Needs review
Permit segments
1SS-591 W to Loop 335
Matches permit
2US-87 N to Dumas
Matches permit
3US-287 N to Stratford
Matches permit
4US-54 NE to Texhoma (OK line)
Matches permit
5US-54 E to Guymon
Needs review
Two roads in the map data fit this text. The permit does not say which one.
6US-54 E to Liberal (KS line)
Matches permit
How it works
From a stack of PDFs to one checked trip.
Each state sends its own permit with its own wording. You do not retype any of it.
- Step 01
Drop off the permits
Upload the permit PDFs for a load in the app, one per state. Or email them to your dropoff address.
- Step 02
CDL Pilot reads them
Every route segment and restriction is pulled from each PDF, including scanned ones. Travel-time windows, escort rules, and bridge and clearance notes come along with the route.
- Step 03
Rebuild and verify
The permitted route is rebuilt on a map, leg by leg. Every road is checked against the permit text using OpenStreetMap road data. Anything that does not match is flagged with the reason.
- Step 04
Approve and share
The approved route stitches across state lines into one trip, with each restriction pinned to where it applies. Send it out as a map, a turn sheet, a GPX/KML file, or a chat message.
Shows its work
You see what matched and what did not.
A route you cannot check is a route you cannot trust. So every permit segment is shown next to what was found on the map.
- Works with the PDF the state issued
- CDL Pilot is not tied to one state permitting system. If you have the permit as a PDF, it can read it.
- Every segment gets a status
- Green means the road matches the permit text. Anything else is marked needs review, and the reason is shown next to it.
- It never silently fixes the route
- If a road does not match, CDL Pilot says so. It does not swap in a road it thinks you meant.
US-87 N to Dumas
US-87 northbound, ends at Dumas. Every road in the built route matches.
Matches permitUS-54 E to Guymon
Two roads in the map data fit this text. The permit does not say which one. A person picks.
Needs reviewUS-54 E to Liberal (KS line)
US-54 eastbound, ends at the Kansas line near Liberal. Matches.
Matches permit
Who it is for
Built for the people who actually run the loads.
Owner-operators
You run the load and you read the permit. Get one route you can check before you roll, not a pile of PDFs and a GPS you retype every road into.
Small carriers
Keep every permit for a load in one place. Give the office the approve button and give drivers the finished route. Reminders for permit expiry and travel windows run on their own.
Dispatchers
Work through the flagged segments, approve the trip, and send it to the driver in Slack or Telegram. Each restriction is pinned to the part of the route it applies to.
Security and trust
Permits are sensitive. We treat them that way.
- Encrypted in transit and at rest
- Each organization isolated on every query
- Audit log of uploads, approvals, and exports
- Emailed permits only from your allowlist
Pricing
Start free. Pay when it is running your loads.
- Free$0
- 3 loads a month, 1 user, map and turn sheet.
- Pro$49 per month
- Per company. Unlimited loads, team roles, email dropoff, exports, and reminders.
- EnterpriseContact us
- SSO/SAML, audit log export, custom data retention, and priority support.
Stop retyping the permit.
Drop off your next permit and see the route checked against it, segment by segment.